BD4930FVE-TR Overview
As you can see, this power management is mounted through 5 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels on this power managment ic that can be found in a series. Please find attached SOT-665 functions for your reference in this IC power. This IC power shares lots of benefits with other Voltage Detector products. When a supply voltage of 1 is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. A total of 5 pins are located on this power management. 5 pins make up the power management. There should be a minimum voltage supply (Vsup) of 950mV for this PMIC. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 10V volts. A Surface Mount mounting type is recommended. You should set the supervisor's temperature during -40°C~105°C TA . During operation, this power management system outputs Push-Pull, Totem Pole. A similar IC managements number of the manufacturer can always be found by using BD49, the base power ics number. At most, voltage supervisor can operate at a supply temperature of 1.53μA. The IC power comes from the well-known BD49xxx series.
BD4930FVE-TR Features
Voltage Detector type
Minimum supply voltage of 950mV
BD4930FVE-TR Applications
There are a lot of ROHM Semiconductor BD4930FVE-TR Voltage Supervisors applications.
- Household appliances
- Precision measurement
- Medical-specific isolation transformer
- Military electronics
- Refrigeration
- Power distribution systems of ICU
- Leakage current detection
- Digitally controlled LDO regulators circuit
- DSP
- Important electronics for automotive safety
