BD4925G-TR Overview
Packaged in the form of a Tape & Reel (TR), power management is easy to use. Please refer to power management for SC-74A, SOT-753 functions. There are a lot of similarities between this IC management and other Voltage Detector products. In a 1 supply voltage, the PMIC chip conducts. Surface Mount is the one that mounts power management. Power management has a total of 5 pins. The pins of the power management system count 5. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.2V. There should be no more than 10V volts of maximum supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~105°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. For this power management, there is an 900nA volt supply current. If you want to search for similar IC managements of this manufacturer, you can always refer to BD49, which is the base power ics number. At most, voltage supervisor can operate at a supply temperature of 1.53μA. As you may know, this PMIC comes from the well-known BD49xxx series product line.
BD4925G-TR Features
Voltage Detector type
Minimum supply voltage of 1.2V
900nA operating supply current
BD4925G-TR Applications
There are a lot of ROHM Semiconductor BD4925G-TR Voltage Supervisors applications.
- Utility meter
- Medical-specific insulation monitor
- Fire equipment power monitoring system
- DVR
- Military electronics
- Power communication system
- Battery-powered equipment
- Battery cars
- emergency room
- Kitchen appliances
