Name: BD4850G-TR
Brand: ROHM Semiconductor
SKU: BD4850G-TR
Price: 0.48000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	20 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SC-74A, SOT-753
Number of Pins	5
Operating Temperature	-40°C~105°C TA
Packaging	Tape & Reel (TR)
Published	2013
Series	BD48xxx
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	5
ECCN Code	EAR99
Type	Voltage Detector
Subcategory	Power Management Circuits
Max Power Dissipation	540mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Number of Functions	1
Supply Voltage	4.8V
Base Part Number	BD48
Output	Open Drain or Open Collector
Pin Count	5
Power Supplies	5V
Number of Channels	1
Max Supply Voltage	10V
Min Supply Voltage	1.2V
Operating Supply Current	900nA
Max Supply Current	1.8μA
Adjustable Threshold	NO
Accuracy	1 %
Watchdog Timer	No
Reset	Active Low
Voltage - Threshold	5V
Number of Voltages Monitored	1
Min Reset Threshold Voltage	4.925V
Max Reset Threshold Voltage	5.075V
Threshold Voltage	+5V
Length	2.9mm
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

BD4850G-TR Product Details

BD4850G-TR Overview

There are 5 mounting terminals on the voltage supervisor, each of which has a different function. Packaged in the form of a Tape & Reel (TR), power management is easy to use. To assist you, this IC power includes 1 functions. Power management consists of 1 channels, each of which can be used independently. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. Compared to other Voltage Detector products, this PMIC has a lot of benefits to offer. A supply voltage of 4.8V is used to conduct the PMIC chip. IC management conducts in a 1-voltage supply. The mount is provided by Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. There are a total of 5 pins on power management. Pin count of the power management is 5. There should be a minimum voltage supply (Vsup) of 1.2V for this PMIC. The maximum supply voltage (Vsup) in this PMIC should not exceed 10V volts. Power management recommends the Surface Mount mounting type. This range of temperature should be set for the supervisors: -40°C~105°C TA. Power management has an output of Open Drain or Open Collector during operation. As far as the supply current of the power management is concerned, it is 900nA. A similar IC managements number of the manufacturer can always be found by using BD48, the base power ics number. The power management must be powered by 5V volts to function properly. The maximum supply temperature is 1.8μA. A PMIC from the well-known BD48xxx series of products is being offered here.