BD4831G-TR Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. There is a Tape & Reel (TR)-packaging method applied to IC management. Please refer to this PMIC for 1 functions. It is possible to find on this power management a series of 1 channels. IC management is packaged as a SC-74A, SOT-753 package. There are a lot of similarities between this IC management and other Voltage Detector products. IC management conducts in a 2.9V-voltage supply. When a supply voltage of 1 is applied to the power ic, it conducts. The mount is provided by Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. There are a total of 5 pins on power management. 5 pins make up the power management. IC management can only work with a supply voltage of -300mV volts. This IC power should be powered by no more than 10V volts of supply voltage (Vsup). In this case, Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~105°C TA. Power management has an output of Open Drain or Open Collector during operation. As far as the supply current of the power management is concerned, it is 900nA. If you want to search for similar IC managements of this manufacturer, you can always refer to BD48, which is the base power ics number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 1.53μA. Supervisors from the well-known BD48xxx series product line are featured in this PMIC.
BD4831G-TR Features
Voltage Detector type
Minimum supply voltage of -300mV
900nA operating supply current
BD4831G-TR Applications
There are a lot of ROHM Semiconductor BD4831G-TR Voltage Supervisors applications.
- Leakage current detection
- Precision measurement
- Network equipment
- Medical-specific isolation transformer
- Embedded computing
- Electronics installed in the vehicle
- DVR
- Microcontroller system
- Rechargeable batteries
- Smart meter
