BD4827G-TR Overview
In terms of packaging, power management follows the Tape & Reel (TR) model. To assist you, this PMIC includes SC-74A, SOT-753 functions. With power management, you get a lot of benefits that you won't find in other Voltage Detector products. IC management conducts in a 1-voltage supply. The mount is provided by Surface Mount. 5 pins are present in total in this power management. There are 5 pins on the power managment ic. It is recommended that Vsup should not be less than -300mV for this IC power. Voltage (Vsup) shouldn't exceed 10V volts in this PMIC. The mounting type of the supervisors is Surface MountIt is recommended that the supervisor be set to this temperature: -40°C~105°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. For this power management, there is an 900nA volt supply current. It is always advisable to use BD48, the base supervisor number, when searching for similar PMICs from the manufacturer. A maximum supply temperature of 1.53μA can be used. The IC power comes from the well-known BD48xxx series.
BD4827G-TR Features
Voltage Detector type
Minimum supply voltage of -300mV
900nA operating supply current
BD4827G-TR Applications
There are a lot of ROHM Semiconductor BD4827G-TR Voltage Supervisors applications.
- emergency room
- Unattended substation automation
- Display equipment
- Digitally controlled LDO regulators circuit
- Medical-specific insulation monitor
- Battery cars
- Electric heating appliances
- Power communication system
- Microprocessor system
- Battery-powered equipment
