BD45441G-TR Overview
Power management is mounted through 5 terminals. Tape & Reel (TR)-packaging is used. The purpose of this IC management is to provide you with a reference of 1 functions. This power management is made up of 1 channels which are available in a series format. Please refer to power management for SC-74A, SOT-753 functions. It is a IC power that shares many benefits with other products from the Voltage Detector line. When 6.4V is applied to the power ic, it conducts. Power management conducts at a voltage of 1. Power management is included in the Surface Mount mount. There is a subcategory of this power ic known as Power Management Circuits. Taking into account all of the pins, this power management has a total of 5. This power management system has 5 pins. Supply voltage (Vsup) should be at least 950mV for this power management. In this PMIC, the maximum supply voltage (Vsup) should not exceed 9.5V volts. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~105°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. It is always advisable to use BD45, the base supervisor number, when searching for similar PMICs from the manufacturer. Voltage supervisor can work with a supply temperature of 3.15μA at the most. A PMIC from the well-known BD45xxx series of products is being offered here.
BD45441G-TR Features
Voltage Detector type
Minimum supply voltage of 950mV
BD45441G-TR Applications
There are a lot of ROHM Semiconductor BD45441G-TR Voltage Supervisors applications.
- Important electronics for automotive protection
- Battery cars
- Solar power charger
- Power communication system
- Medical-specific insulation monitor
- Power distribution systems of infant care room
- Important electronics for automotive safety
- Personal computers
- Utility meter
- Insulation fault location system
