BD45255G-TR Overview
As you can see, this power management is mounted through 5 terminals. Packaged in the form of a Tape & Reel (TR), power management is easy to use. In this IC power you will find 1 functions for you to refer to. A series of 1 channels can be found on this supervisor. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. With power management, you get a lot of benefits that you won't find in other Voltage Detector products. The supervisor is always powered by a 4.5V volt supply. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount mounts power management on the wall. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. Taking into account all of the pins, this power management has a total of 5. This power management has 5 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 950mV. Voltage (Vsup) shouldn't exceed 10V volts in this PMIC. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The supervisors should be set to the following temperature: -40°C~105°C TA. During operation, this power management system outputs Open Drain or Open Collector. To find similar IC managements from the manufacturer, you can always search by BD45. At the most, voltage supervisor can work with a supply temperature of 2.85μA. The IC power comes from the well-known BD45xxx series.
BD45255G-TR Features
Voltage Detector type
Minimum supply voltage of 950mV
BD45255G-TR Applications
There are a lot of ROHM Semiconductor BD45255G-TR Voltage Supervisors applications.
- Smart meter
- Electric heating appliances
- Medical-specific insulation monitor
- DSP
- Insulation fault location system
- Detection of phase loss
- Cloud computing
- Automotive permanent magnet synchronous motors
- WiFi router
- Electrical fire monitoring system
