BD3481FS-E2 Overview
The book is also accompanied by a case, which only adds to the value of the book. As a mounting type, Surface Mount is recommended for it. A SSOP case has been embedded with it. I have a device with 4 channels attached to it. This chip has 20 terminations, which means it has 20 terminations on it. The BD3481 family of parts can be found by searching for a part number that is similar to it. As far as the 20 pins on the chip are concerned, they are accessible. It is possible to sort the consumer IC type of a part using TONE CONTROL CIRCUIT. It is important that the minimum supply voltage (Vsup) for this part is greater than 7V. In this part, we have the Other Consumer ICs family. The voltage can be given at 8.5V volts. Max supply voltage (Vsup) reaches 9.5V. In order to mount it, Surface Mount is required. A 2 band is attached to it. When the temperature of the sensor is below 85°C, it is recommended that you use it. During operation, the chip is not operated below the operating temperature of -40°C. 20-pins are present on the chip.
BD3481FS-E2 Features
With SSOP channels
consumer IC type: TONE CONTROL CIRCUIT
BD3481FS-E2 Applications
There are a lot of ROHM Semiconductor
BD3481FS-E2 Audio Special Purpose applications.
- Replacement of DIR1703
- Other Applications Requiring S/PDIF Receiver
- Audio Differential Line Drivers
- Audio Mix Consoles
- Distribution Amplifiers
- Graphic and P arametric Equalizers
- Dynamic Range Processors
- Digital Effects Processors
- Telecom Systems
- Hi-Fi Equipment
