SN74LS590DR Overview
The device is packaged in the 16-SOIC (0.154, 3.90mm Width)type. This configuration uses 16terminations. By supplying 5Vwith a voltage of 5V , the device can be operated in a completely flexible manner. An interconnection of 1elements is provided by wires. All component pins are equal to 16. There is a package in the form of Tape & Reel (TR). In this case, it belongs to the family of [0]. Due to the fact that it is a member of the 74LSseries, it has a wide range of applications. Logic type Binary Counter is adopted. Ideally, the operating temperature should be set to 0°C~70°C. This device is mounted in the Surface Mountposition. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. An array consists of 8bits for each element. Based on the Pbfree code, the result may be yes. It is important to note that TCO OUTPUT; REGISTERED OUTPUTSare really important features of this electronic device. As low as 4.75V Vsup is the minimum supply voltage. It is possible to provide a voltage up to 5.25V (Vsup).
SN74LS590DR Features
Embedded in the 16-SOIC (0.154, 3.90mm Width) package
8 bits per element
TCO OUTPUT; REGISTERED OUTPUTS
SN74LS590DR Applications
There are a lot of Rochester Electronics, LLC
SN74LS590DR Counters & Dividers applications.
- Analog multiplexing and demultiplexing
- Digital multiplexing and demultiplexing
- Signal gating
- Frequency dividing circuits
- Time delay circuits
- Communications Digital Frequency Synthesizers;
- VHF, UHF, FM, AM, etc.
- Fixed or Programmable Frequency Division
- Time Out Timer for Consumer-Application Industrial Controls
- Timing applications
