SN74ALVCH374N Overview
The package is in the form of 20-DIP (0.300, 7.62mm). Package Tubeembeds it. Currently, the output is configured to use Tri-State, Non-Inverted. This trigger uses the value Positive Edge. It is mounted in the way of Through Hole. The JK flip flop operates at 1.65V~3.6Vvolts. A temperature of -40°C~85°C TAis used in the operation. The type of this D latch is D-Type. This type of FPGA is a part of the 74ALVCH series. You should not exceed 150MHzin its output frequency. A total of 1 elements are present. There is a consumption of 10μAof quiescent energy. This JK flip flop has a 5pFfarad input capacitance.
SN74ALVCH374N Features
Tube package
74ALVCH series
SN74ALVCH374N Applications
There are a lot of Rochester Electronics, LLC SN74ALVCH374N Flip Flops applications.
- Supports Live Insertion
- Frequency Divider circuits
- Consumer
- Bus hold
- Common Clocks
- Automotive
- Memory
- Divide a clock signal by 2 or 4
- Shift registers
- Power down protection
