MAX4273ESE Overview
In the 16-SOIC (0.154, 3.90mm Width) package you will find it.Channel 1 is currently available.A Tube-shaped package holds it.The 16 terminations total to three.Device DUAL is located at the terminal position.The device consists of a total of 16 pins.The supply voltage 5V is necessary for high efficiency.As Surface Mount would say, it's set up like that.The electrical component in question falls into the classification Hot Swap Controller.A reliable operation requires the temperature to be set to -40°C~85°C.Apps for General Purpose are available on the device.A feature of OVP, UVLO describes it.Using a 2.7V~13.2VV power source should be able to power the device.Hot-swappable device has Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault programmable features.Presently, there is a sufficient supply of 600μA.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 2.7V so that the device can function normally.
MAX4273ESE Features
The terminal position of 16
Features of OVP, UVLO
Programmable features of Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault
MAX4273ESE Applications
There are a lot of Rochester Electronics, LLC
MAX4273ESE hot swap controllers applications.
- Safe board insertion and extraction
- Industrial computers and servers
- Redundant-array-of-independent-disk (RAID) storage
- Other forms of communications infrastructure
- Board or blade insertion into live backplanes
- Backplane
- Loads
- Distributed power systems
- Redundant negative voltage supplies
- Central office switching systems
