Name: ISL84544IP
Brand: Rochester Electronics, LLC
SKU: ISL84544IP
Price: 1.60000 USD
Availability: InStock

new-10%

ISL84544IP

Manufacturer part number:ISL84544IP

Manufacturer:Rochester Electronics, LLC

Description:100ns, 75ns SPDT 60Ohm DUAL Analog Switches 8 Pins 100pA 3.3V 8-DIP (0.300, 7.62mm)

Case Package:SOT-23

Datasheet:ISL84544IP Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Surface Mount	NO
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	8
Terminal Finish	TIN LEAD
Technology	CMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Number of Functions	2
Supply Voltage	3.3V
Terminal Pitch	2.54mm
[email protected] Reflow Temperature-Max (s)	NOT SPECIFIED
Pin Count	8
JESD-30 Code	R-PDIP-T8
Number of Channels	1
Number of Circuits	1
On-State Resistance (Max)	60Ohm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	76 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	8pF 8pF
On-state Resistance Match-Nom	0.8Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	100ns, 75ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	800m Ω
Crosstalk	-90dB @ 1MHz
Switch-off Time-Max	50ns
Voltage - Supply, Single (V+)	2.7V~12V
Height Seated (Max)	5.33mm
Length	9.585mm
Width	7.62mm
RoHS Status	Non-RoHS Compliant

ISL84544IP Product Details

ISL84544IP Overview

Due to its 8-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tube. Mounted in Through Hole is this multiplexer. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. The operating temperature is extended to around -40°C~85°C TA. In total, there have been 8 terminations. A electrical component with 1 channels is capable of high-quality output. If the voltage supply is 3.3V volts, the electrical component should be turned on and run. A total of 8 pins are injected into the electrical part body. These analog multiplexers are built based on SPDT switching circuits. A total of 1 circuits make up this switch device. This analog switch requires a voltage of 2.7V~12V to drain from a single voltage supply.