CY2309SI-1 Overview
The Tube method is used for packaging clock ICs. This clock generator is embedded in the 16-SOIC (0.154, 3.90mm Width) package. Frequency generator can maintain a maximum temperature of NOT SPECIFIED under reflowing conditions. As a result, frequency synthesizers can be found to contain 16 terminations. Clock generator ics require a voltage of 3.3V. The input of this clock generator is designed to be LVCMOS, LVTTL. There are 1 circuits implemented in order to achieve full performance from this electronic part. There is a maximum frequency of 133.33MHz Max with this clock-based frequency generator. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. There is a maximum voltage of 3.6V for this clock generator. A maximum voltage of 3V should be used for this frequency generator for safety reasons. There are 3V~3.6V available for use with this clock PLL. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. The RF synthesizer is compatible with LVCMOS logic levels. This electronic component can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer. Microprocessor-specific clock PLL with 16 bits. There is a low timing skew at 0.25 nsmax with this RF synthesizer. If you search for the 2309 family of electronic parts, you will be able to find similar parts.
CY2309SI-1 Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
CY2309SI-1 Applications
There are a lot of Rochester Electronics, LLC CY2309SI-1 Clock Generators applications.
- Cellular/4G
- Pagers
- Simple clock clean-up circuits
- Electronic equipment
- Broadcast communication
- Digital circuits
- High-speed optical transport network (OTN)
- Peripheral devices
- Vector network analyzers (VNA)
- Carrier synchronization in wired communication
