CD74HC374E Overview
The item is packaged in 20-DIP (0.300, 7.62mm)cases. The Tubepackage contains it. Currently, the output is configured to use Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. There is an electric part mounted in the way of Through Hole. A voltage of 2V~6Vis used as the supply voltage. It is operating at a temperature of -55°C~125°C TA. It is an electronic flip flop with the type D-Type. This type of FPGA is a part of the 74HC series. You should not exceed 60MHzin the output frequency of the device. A total of 1 elements are present. There is 8μA quiescent consumption. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. A voltage of 5V is used to power it. A 10pFfarad input capacitance is provided by this T flip flop. This D flip flop belongs to the family of HC/UH. Vsup reaches its maximum value at 6V. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. This flip flop has a total of 2ports.
CD74HC374E Features
Tube package
74HC series
CD74HC374E Applications
There are a lot of Rochester Electronics, LLC CD74HC374E Flip Flops applications.
- Single Down Count-Control Line
- Balanced 24 mA output drivers
- Buffer registers
- Frequency Divider circuits
- Bus hold
- Data Synchronizers
- Memory
- Shift Registers
- Data transfer
- Communications
