Name: ADG822BRM
Brand: Rochester Electronics, LLC
SKU: ADG822BRM
Price: 1.64000 USD
Availability: InStock

new-10%

ADG822BRM

Manufacturer part number:ADG822BRM

Manufacturer:Rochester Electronics, LLC

Description:45ns, 16ns SPST - NC 600mOhm DUAL Analog Switches 8 Pins 250pA 3.6V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Case Package:SOT-23

Datasheet:ADG822BRM Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Terminal Finish	TIN LEAD
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	2
Supply Voltage	3.6V
Terminal Pitch	0.65mm
Reach Compliance Code	unknown
[email protected] Reflow Temperature-Max (s)	30
Pin Count	8
JESD-30 Code	S-PDSO-G8
Supply Voltage-Max (Vsup)	5.5V
Number of Channels	1
Number of Circuits	2
-3db Bandwidth	24MHz
On-State Resistance (Max)	600mOhm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	52 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	85pF 98pF
On-state Resistance Match-Nom	0.16Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	45ns, 16ns
Charge Injection	15pC
Channel-to-Channel Matching (ΔRon)	160m Ω
Crosstalk	-82dB @ 1MHz
Switch-on Time-Max	67ns
Switch-off Time-Max	18ns
Voltage - Supply, Single (V+)	1.8V~5.5V
Height Seated (Max)	1.1mm
Length	3mm
RoHS Status	Non-RoHS Compliant

ADG822BRM Product Details

ADG822BRM Overview

The electronic component is convenient to ship overseas because it is packed in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). Advanced packaging method Tube is used to provide high reliability. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Around -40°C~125°C TA is the extended operating temperature. 8 terminations have been made so far. As a result of its 1 channels, this electronic component provides high-quality output. A 3.6V voltage supply should turn on and run the electronic component. An injection of 8 pins is performed into the body of the electrical component. A SPST - NC switching circuit is used to build these analog multiplexers. Circuits number 2 make up this analogue multiplexer. A voltage of 1.8V~5.5V is required to drain this analog switch from a single voltage supply.