Name: MAX4655EUA+
Brand: Maxim Integrated
SKU: MAX4655EUA+
Price: 5.91000 USD
Availability: InStock

new-10%

MAX4655EUA+

Manufacturer part number:MAX4655EUA+

Manufacturer:Maxim Integrated

Description:200ns, 100ns SPST - NC 10Ohm Analog Switches BREAK-BEFORE-MAKE MAX4655 8 Pins 1nA 15V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Case Package:SOT-23

Datasheet:MAX4655EUA+ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2007
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	10Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	1.509W
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX4655
Pin Count	8
Operating Supply Voltage	20V
Number of Channels	1
Number of Circuits	1
Max Supply Voltage	40V
Min Supply Voltage	9V
Nominal Supply Current	150μA
Max Supply Current	150μA
Throw Configuration	SPST
Turn On Delay Time	125 ns
Voltage - Supply, Single/Dual (±)	9V~40V ±4.5V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	200 ns
Max Dual Supply Voltage	20V
-3db Bandwidth	210MHz
On-State Resistance (Max)	10Ohm
Min Dual Supply Voltage	4.5V
High Level Output Current	300mA
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	77 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	25pF 25pF
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	200ns, 100ns
Charge Injection	23pC
Channel-to-Channel Matching (ΔRon)	300m Ω
Switching	BREAK-BEFORE-MAKE
Normal Position	NC
Length	3mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

MAX4655EUA+ Product Details

MAX4655EUA+ Overview

Shipping overseas is convenient due to the electrical component's packing in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tube. A switch device like this is mounted in Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. In total, there have been 8 terminations. A electrical component with 1 channels is capable of high-quality output. It is safe to turn on and run the electronic component with a 15V voltage supply. An injection of 8 pins is performed into the body of the electrical component. Circuits based on SPST - NC switching are used to construct these analog switch ics. The multiplexer consists of 1 circuits. Using the MAX4655 search parameter, you can discover variants of the switch. The internal resistance of this digital multiplexer is 10Ohm. To find out what the functions of 8 pins are, please refer to their datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. Users shouldn't supply more than 40V voltage to the switch device. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 9V should be the lowest voltage fed to the electronic component. When the digital multiplexer is charged above 150μA, damage can occur. If put voltage greater than 20V on the multiplexer, damage may be caused to the device. The voltage should be at least 4.5V if you are using dual power supplies. 20V operating voltages can be used with this electrical part.