Name: MAX312LCSE+
Brand: Maxim Integrated
SKU: MAX312LCSE+
Price: 8.43000 USD
Availability: InStock

new-10%

MAX312LCSE+

Manufacturer part number:MAX312LCSE+

Manufacturer:Maxim Integrated

Description:225ns, 185ns SPST - NC 10Ohm Analog Switches BREAK-BEFORE-MAKE MAX312 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:MAX312LCSE+ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	10 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	2007
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	10Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	842mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	1.27mm
Base Part Number	MAX312
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	18V
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	30V
Min Supply Voltage	4.5V
Nominal Supply Current	5μA
Max Supply Current	200μA
Throw Configuration	SPST
Turn On Delay Time	275 ns
Voltage - Supply, Single/Dual (±)	4.5V~36V ±4.5V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	235 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	10Ohm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	75 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	15pF 15pF
On-state Resistance Match-Nom	0.3Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	225ns, 185ns
Charge Injection	20pC
Channel-to-Channel Matching (ΔRon)	300m Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	225ns
Normal Position	NC
Height Seated (Max)	1.75mm
Length	9.9mm
Width	3.9mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX312LCSE+ Product Details

MAX312LCSE+ Overview

The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tube. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. Around 0°C~70°C TA is the extended operating temperature. In total, there are 16 terminations. This electronic part offers high-quality output due to its 1 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. There is an electrical component included in the 16 series. Based on SPST - NC switching circuits, these analog multiplexers work. The circuits in this analogue multiplexer number 4. Using the MAX312 search parameter, you can discover variants of the switch. As far as internal resistance is concerned, it has 10Ohm. For functions related to 16 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 30V. A analog switch ic that has a cost-effective Dual, Single supply type. It is recommended that the electrical component receives a voltage of 4.5V. The switch multiplexer may be damaged if it is exposed to voltage greater than 200μA. There is no problem with using dual supply voltage, but it should not exceed 20V. For dual power supplies, a voltage of at least 4.5V should be attached. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. 18V operating voltages can be used with this electrical part.