Name: MAX312CPE+
Brand: Maxim Integrated
SKU: MAX312CPE+
Price: 16.28000 USD
Availability: InStock

new

MAX312CPE+

Manufacturer part number:MAX312CPE+

Manufacturer:Maxim Integrated

Description:225ns, 185ns SPST - NC 10Ohm Analog Switches BREAK-BEFORE-MAKE MAX312 16 Pins 500pA 15V 16-DIP (0.300, 7.62mm)

Case Package:SOT-23

Datasheet:MAX312CPE+ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Number of Pins	16
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	2002
JESD-609 Code	e0
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Termination	Through Hole
ECCN Code	EAR99
Resistance	10Ohm
Terminal Finish	Tin/Lead (Sn85Pb15)
Subcategory	Multiplexer or Switches
Max Power Dissipation	842mW
Technology	CMOS
Peak Reflow Temperature (Cel)	240
Number of Functions	4
Supply Voltage	15V
[email protected] Reflow Temperature-Max (s)	20
Base Part Number	MAX312
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	18V
Power Supplies	512/+-15V
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	30V
Min Supply Voltage	4.5V
Nominal Supply Current	5μA
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	275 ns
Voltage - Supply, Single/Dual (±)	4.5V~30V ±4.5V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	235 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	10Ohm
Min Dual Supply Voltage	4.5V
Dual Supply Voltage	9V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	65 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	15pF 15pF
On-state Resistance Match-Nom	0.3Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	225ns, 185ns
Charge Injection	20pC
Channel-to-Channel Matching (ΔRon)	300m Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	10Ohm
Normal Position	NO
Height	4.45mm
Length	19.43mm
Width	7.87mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX312CPE+ Product Details

MAX312CPE+ Overview

As the electronic part is packed in 16-DIP (0.300, 7.62mm), international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tube. Through Hole is where this multiplexer is located. Multiplexers and demultiplexers have a number of circuits 1:1. Operating temperature extended to 0°C~70°C TA. A total of 16 terminations have been recorded. This electronic part offers high-quality output due to its 1 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. It is part of the design of the 16 series that this electronic component is included. Circuits based on SPST - NC switching are used to construct these analog switch ics. There are 4 circuits in this switch device. Try searching with MAX312 if you're looking for variants. It has an internal resistance of 10Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. Multiplexers should not be powered above 30V in normal situations. An effective Dual, Single supply digital multiplexer. 4.5V is the lowest voltage the electrical component should receive. A voltage higher than 1μA may cause damage to the switch multiplexer. Despite this switch's dual supply capability, its voltage should not exceed 20V. A dual power supply should have at least 4.5V voltage attached. This analog switch ic utilizes SEPARATE OUTPUT output. It can operate from 18V operating voltages. There is 10Ohm resistance between the Drain and Source on this part.