R1WV3216RBG-7SI#S0 Overview
As far as its memory type goes, it falls into the Volatile category. It comes in a Tape & Reel (TR). There is a 48-TFBGA case embedded in it. On the chip, there is an 32Mb 2M x 16 memory, which is the size of the chip's memory. This device utilizes a SRAM format memory which is of mainstream design. Due to its wide temperature range of -40°C~85°C TA, this device is well suited to a wide range of applications that require high performance. A voltage of 2.7V~3.6V is possible to be applied to the supply. The recommended mounting type for memory ics is Surface Mount. R1WV3216, as the device's base part number, is frequently referred in order to select similar parts. A package of 48 pins is used to protect this memory device. A voltage of 3V is noted as the operating supply voltage for this memory. Memory chips configured with Surface Mount mounting achieve high efficiency and simplicity. It is rated 55mA for its nominal supply current when it comes to the memory component. Several ports on this chip are used to access one memory address for reading and writing. Temperatures below -40°C should not be used with this memory ics. It is recommended for operation at temperatures no higher than. This part should have a minimum supply voltage of 2.7V. A maximum voltage of 3.6V shall be allowed for its operating voltage.
R1WV3216RBG-7SI#S0 Features
Package / Case: 48-TFBGA
48 Pins
Operating Supply Voltage:3V
R1WV3216RBG-7SI#S0 Applications
There are a lot of Renesas Electronics America R1WV3216RBG-7SI#S0 Memory applications.
- embedded logic
- nonvolatile BIOS memory
- mainframes
- DVD disk buffer
- multimedia computers
- printers
- networks
- networking
- Cache memory
- hard disk drive (HDD)
