AN8016SHAE1V Overview
Capsuled in the 10-FSOP (0.169, 4.30mm Width) package, the switching controller suits most application needs. 1 outputs are supported by the dc motor controller. Cut Tape (CT) is the solid enclosure in which PMIC is packaged. With this function, you can deal with Transistor Driver dc switching's outputs (s). 1.8V~14V is the operating voltage and supply voltage of the dc control. Worked in an dc switcher with a -30°C~85°C TA rating. With this switching controller, you can switch at 2kHz~1MHz. A generalization of dc dc regulator can be made using Surface Mount. To ensure efficient switching, this dcdc regulator features a Enable, Soft Start. You can find other relevant dc to dc converter ics by searching "AN8016SH-A". There are a total of 10 pins on switching converter. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 80 %. A temperature of -30°C or higher is recommended. DC regulator should run at a temperature 85°C higher than 85°C. This part's supplier dc dc controller package would be 10-SSOP. Switching with 1 phases is the property of this controller.
AN8016SHAE1V Features
Transistor Driver Outputs
Switching Frequency: 2kHz~1MHz
Enable, Soft Start
Max Duty Cycle: 80 %
AN8016SHAE1V Applications
There are a lot of Panasonic Electronic Components AN8016SHAE1V DC to DC converter applications.
- Sensitive electronic devices
- Current source circuits
- Low output voltage switching power supply circuits
- Packaging
- Photovoltaic power
- Motor controller circuits
- Automatic plug-in machines
- Boring machines
- Energy management systems
- Series voltage regulation circuits
