P3P816711A-06OR Overview
A clock integrated circuit is packaged in a Tape & Reel (TR)-shaped package because it is for use as a clock. In the SOT-23-6 Thin, TSOT-23-6 package, there is an embedded clock generator. There are a total of 6 terminations in this file. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. LVCMOS, Crystal is designed as this clock generator's input. Using 1 circuits, the electronic part's full performance can be accessed. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 30MHz. The Surface Mount allows this electrical component to be easily installed on the panel. The supply voltage for this frequency synthesizer should be kept above 2.97V for safety considerations. There should be 2.97V~3.63V provided with this RF synthesizer. Based on test statistics, ambient temperature should be set at 0°C~70°C. The RF synthesizer is compatible with LVCMOS logic levels. An IC that generates clocks specifically for microprocessors, this clock PLL is 6-bits in si6e. According to the base part number P3P816711A, its related parts can be found. There are a number of 6 pins that are available on the frequency synthesizers. Clock PLL is capable of handling a voltage of 3.3V. 3P-family electronic parts are similar. The logic IC PLL clock adopts is PLL BASED CLOCK DRIVER. For the time clock generator to operate properly, 10mA of supply current are required.
P3P816711A-06OR Features
Available in the SOT-23-6 Thin, TSOT-23-6
Supply voltage of 3.3V
Operating supply voltage of 3.3V
P3P816711A-06OR Applications
There are a lot of ON Semiconductor P3P816711A-06OR Clock Generators applications.
- High-speed communication applications
- Clock signals to the high-speed Digital RF circuits
- Signal analyzer
- Clock recovery
- Infotainment systems
- Computers to manage memory cards
- Fiber Channel
- Bluetooth transmitters
- Modems
- Microwave point-to-point systems
