P1P8160AG-10CR Overview
A clock integrated circuit is packaged in a Tape & Reel (TR)-shaped package because it is for use as a clock. As part of the 10-WFDFN Exposed Pad package, this clock generator is embedded. 10 terminations can be found in frequency synthesizer. Basically, this time clock generator needs a voltage of 3.3V. LVCMOS, Crystal is designed as this clock generator's input. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 27MHz. With the Surface Mount, it is easy to install this electric component on the panel. CLOCK GENERATOR, OTHER uPs/uCs/peripheral ICs are incorporated in this digital clock generator. Clock generators should operate with the voltage supply of 2.97V~3.63V. Test statistics estimate a temperature of -10°C~85°C, which should be set as the ambient temperature. There are several logic levels in LVCMOS logic that can be used with this clock generator. An IC that generates clocks specifically for microprocessors, this clock PLL is 10-bits in si10e. P1P8160A is the base part number for finding related electronic parts. The frequency synthesizer has 10 pins that are available. The supply voltage should be maintained at 3.3V for high efficiency. The device is usually classified as a type of Clock Generators device. Elements can be destroyed by excessive supply current (greater than 22mA).
P1P8160AG-10CR Features
Available in the 10-WFDFN Exposed Pad
Supply voltage of 3.3V
Operating supply voltage of 3.3V
P1P8160AG-10CR Applications
There are a lot of ON Semiconductor P1P8160AG-10CR Clock Generators applications.
- FPGA and processor clocks
- Media broadcast servers
- Ports
- Sampling clocks for ADC and DAC
- Motor speed controls
- Notebooks
- CB radios
- Test and instrumentation equipment
- Set-top boxes
- Jitter reduction
