NVD3055-150T4G Overview
The maximum input capacitance of this device is 280pF @ 25V, because the input capacitance of an op amp is defined as the difference between the input terminals with one input grounded.Continuous drain current (ID) is the maximum continuous current (ID) the device can conduct, and it is 9A.When VGS=60V, and ID flows to VDS at 60VVDS, the drain-source breakdown voltage is 60V in this device.As shown in the table below, the drain current of this device is 9A.Before drain current conduction can begin, the device's turn-off delay time must be charged up to full capacitance. This value is 12.2 ns.There is no pulsed drain current maximum for this device based on its rated peak drain current 27A.During device turn-on, the input capacitance must be charged for a period of time before drain current conduction can begin, so its delay time is 11.2 ns seconds.Single MOSFETs transistor is the voltage across the gate-source terminal of a transistor that determines the gate-source voltage, VGS.Using drive voltage (10V), this device helps reduce its power consumption.
NVD3055-150T4G Features
a continuous drain current (ID) of 9A
a drain-to-source breakdown voltage of 60V voltage
the turn-off delay time is 12.2 ns
based on its rated peak drain current 27A.
NVD3055-150T4G Applications
There are a lot of ON Semiconductor
NVD3055-150T4G applications of single MOSFETs transistors.
- Micro Solar Inverter
- DC/DC converters
- Power Tools
- Motor Drives and Uninterruptible Power Supples
- Synchronous Rectification
- Battery Protection Circuit
- Telecom 1 Sever Power Supplies
- Industrial Power Supplies
- PFC stages, hard switching PWM stages and resonant switching
- PWM stages for e.g. PC Silverbox, Adapter, LCD & PDP TV,
