NLX2G66DMUTCG Overview
As the electronic part is packed in 8-UFDFN, international shipping is convenient. This packaging method provides high reliability because it uses advanced packaging techniques. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Around -55°C~125°C TA is the extended operating temperature. In total, there have been 8 terminations. Due to its 1 channels, the electrical component produces high-quality output. When the electronic component is given a voltage of 1.8V, it should be turned on and run. An electrical component of this type can be found in the 8 series. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Analog switches have 5.5Ohm internal resistance. To find out what the 8 pins do, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. Digital switch that provides Single power at a cost-effective price. It is recommended that the electrical component receives a voltage of 1.65V. An analogue multiplexer drains from a single voltage supply at 1.65V~5.5V. The analogue multiplexer may be damaged if voltage is greater than 1μA. It is integrated with DIFFERENTIAL MULTIPLEXER analog ICs. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. Among the inputs that can be operated are the 2 inputs.
NLX2G66DMUTCG Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 270MHz
NLX2G66DMUTCG Applications
There are a lot of ON Semiconductor NLX2G66DMUTCG Analog Switches & Multiplexers ICs applications.
- Signal routing between systems
- Communication systems
- PDH Multiplexers
- PDAs
- Access Concentrators
- Central office
- Relay Replacement
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- MP3 players
- Audio and video routing
