Welcome to Hotenda.com Online Store!

logo
userjoin
Home

NLVLVX4245DTR2

NLVLVX4245DTR2

NLVLVX4245DTR2

ON Semiconductor

24 Terminations24 Pin NLVLVX4245 Receivers8/8 Drivers/Receivers1 Functions

SOT-23

NLVLVX4245DTR2 Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 24-TSSOP (0.173, 4.40mm Width)
Number of Pins 24
PackagingTape & Reel (TR)
Published 2007
JESD-609 Code e4
Pbfree Code yes
Part StatusObsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 24
Type Transceiver
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature85°C
Min Operating Temperature -40°C
Additional FeaturePORT B REQUIRES 2.7V TO 3.6V
Technology CMOS
Voltage - Supply 2.7V~5.5V
Terminal Position DUAL
Terminal FormGULL WING
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 1
Supply Voltage 5V
Terminal Pitch0.65mm
[email protected] Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number NLVLVX4245
Pin Count24
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 5.5V
Temperature GradeINDUSTRIAL
Supply Voltage-Min (Vsup) 4.5V
Number of Circuits 1
Number of Ports2
Number of Bits 8
Propagation Delay10 ns
Family LV/LV-A/LVX/H
Output Characteristics 3-STATE
Number of Drivers/Receivers 8/8
High Level Output Current-24mA
Low Level Output Current24mA
Width 4.4mm
RoHS StatusNon-RoHS Compliant
Lead Free Contains Lead
In-Stock:2576 items

NLVLVX4245DTR2 Product Details

NLVLVX4245DTR2 Overview


With the enhanced 24-TSSOP (0.173, 4.40mm Width) package, this driver IC is excellent for driving common LEDs.In the Tape & Reel (TR) package, this receiver is mounted.Since this is a Transceiver can transceiver, many solutions can use it for a variety of functions.Any Surface Mount-type PCB or development board can be used with this wide receiver.Power supply requirements for this differential driver are 2.7V~5.5V.It is possible to have up to 8/8 receivers/drivers in use simultaneously with this electronic part.An operating voltage range of 5V is suitable for this line driver ic.24 terminations are integrated into this wide receiver for driving and receiving signals from data.The pinouts for this transceiver are standardized to meet the needs of the market.The base part number NLVLVX4245 identifies the product type, temperature, package, etc., so you can search for more variants by using it.This is a 24-pin driver IC with enhanced power dissipation control.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.It must be below 85°C when the transceiver module's system is operating.There must not be a minimum operating temperature of -40°C for this optical transceiver.ICs with PORT B REQUIRES 2.7V TO 3.6V functions also improve the overall stability and accuracy of signal management.The manufacturer recommends this transceiver module be handled with a supply voltage lower than 5.5V.In order to run this module isolated transceiver, you should apply at least 4.5V voltage supply to it.As a whole, this transceiver module incorporates a total of 1 circuits.

NLVLVX4245DTR2 Features


Tape & Reel (TR) package
24 pin count
24 pins

NLVLVX4245DTR2 Applications


There are a lot of ON Semiconductor NLVLVX4245DTR2 Drivers/Receivers/Transceivers applications.

  • Optical sub-assembly (OSA)
  • Bridges
  • IPTV front end
  • Interconnection between switches and computers
  • Cordless telephone
  • Satellite ground stations
  • Indoor ad hoc meeting
  • Sensor reporting
  • Wireless 3D game
  • Fiber-to-the-desktop

Get Subscriber

Enter Your Email Address, Get the Latest News