Name: NLAS5223MNR2G
Brand: ON Semiconductor
SKU: NLAS5223MNR2G
Price: 0.54000 USD
Availability: InStock

new-10%

NLAS5223MNR2G

Manufacturer part number:NLAS5223MNR2G

Manufacturer:ON Semiconductor

Description:50ns, 30ns SPDT 300mOhm QUAD Analog Switches BREAK-BEFORE-MAKE NLAS5223 10 Pins 500nA 3V 10-WFQFN

Case Package:SOT-23

Datasheet:NLAS5223MNR2G Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	7 Weeks
Lifecycle Status	ACTIVE (Last Updated: 21 hours ago)
Mounting Type	Surface Mount
Package / Case	10-WFQFN
Surface Mount	YES
Number of Pins	10
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2006
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Resistance	300mOhm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3V
[email protected] Reflow Temperature-Max (s)	40
Base Part Number	NLAS5223
Pin Count	10
Number of Outputs	4
Operating Supply Voltage	3V
Number of Channels	1
Max Supply Voltage	3.6V
Min Supply Voltage	1.65V
Operating Supply Current	1μA
Nominal Supply Current	1μA
Max Supply Current	2μA
Turn On Delay Time	50 ns
Number of Inputs	2
Halogen Free	Halogen Free
Supply Type	Single
Turn-Off Delay Time	30 ns
-3db Bandwidth	17MHz
On-State Resistance (Max)	300mOhm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	65 dB
Current - Leakage (IS(off)) (Max)	500nA
Channel Capacitance (CS(off), CD(off))	75pF
On-state Resistance Match-Nom	0.05Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	50ns, 30ns
Charge Injection	38pC
Channel-to-Channel Matching (ΔRon)	50m Ω (Max)
Crosstalk	-70dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	1.65V~3.6V
Height Seated (Max)	0.8mm
Length	1.8mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

NLAS5223MNR2G Product Details

NLAS5223MNR2G Overview

Presented in 10-WFQFN, this electrical component is convenient for overseas shipping. This packaging method provides high reliability because it uses advanced packaging techniques. A switch device like this is mounted in Surface Mount. 2:1 is the ratio of multiplexer to demultiplexer circuits. Operation at a temperature around -40°C~85°C TA. In total, 10 terminations have occurred. The electronic part delivers high-quality output through its 1 channels. When the electronic component is given a voltage of 3V, it should be turned on and run. As part of its design, the 10 series is equipped with this electronic component. A SPDT switching circuit is used to build these analog multiplexers. Try searching with NLAS5223 if you're looking for variants. As far as internal resistance is concerned, it has 300mOhm. To find out what the 10 pins do, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 3.6V. The analog switch ic is of the Single supply type and is cost-effective. There should be 1.65V voltage fed to the electrical part below 1.65V. It would be sufficient to run this analogue multiplexer with 1μA current. Analogue multiplexers require a 1.65V~3.6V voltage to drain from a single voltage supply. It may damage the digital multiplexer if the voltage is higher than 2μA. It can operate from 3V operating voltages. In order to operate the 2 inputs, there are several steps to follow. The analog switch ics includes 4 outputs.