NCV887100D1R2G Overview
It comes in the 8-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. For outputs of 1, this dc motor controller is suitable. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. Transistor Driver dc switching's outputs (s) are supported. A 3.2V~40V voltage is supplied to the dc control and used for operating it. Worked in a -40°C~150°C TJ dc switcher before. It can switch at 170kHz. The Surface Mount value makes it suitable for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Current Limit, Enable. An analog IC SWITCHING CONTROLLER is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. A variety of dc switching's functions can be performed on 8 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. There is a DC switcher's nominal voltage of 13.2V. NCV887100 can be searched for other relevant dc to dc converter ics. Switching converter has a total of 8 pins. Switching converter is a special type of Switching Regulator or Controllers. You should note down the dc dc regulator's usual output current of 800mA when you start a project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 88 %. The Surface Mount makes DC switcher suitable for most applications and prototypes. DC regulator has a maximum frequency of 187kHz. It is suggested that users apply 40V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. The maximum input voltage of this dc switcher is 40V, so users must limit the voltage accordingly. There must be a 3.2V supply voltage. The dc switcher will not provide an output current greater than 100μA. Datasheets indicate that the switching converter can output 2.5V volts at its maximum. At least 300mV voltage is output by the voltage controller.
NCV887100D1R2G Features
Transistor Driver Outputs
Switching Frequency: 170kHz
Current Limit, Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 88 %
NCV887100D1R2G Applications
There are a lot of ON Semiconductor NCV887100D1R2G DC to DC converter applications.
- Electric heating, lighting
- Surface processing equipment
- Serial communication converter
- Post equipment
- Flexible manufacturing cells
- Computer-related products
- Automatic plug-in machines
- Ball screw pair
- Die casting equipment
- Automatic testing equipment
