NCV303LSN42T1G Overview
As you can see, this power management is mounted through 5 terminals. Tape & Reel (TR)-packaging is used. In this PMIC, you can find 1 functions for your reference. It is possible to find on this power management a series of 1 channels. The purpose of this IC power is to provide you with a reference of SOT-23-5 Thin, TSOT-23-5 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. There is a voltage supply of 1.5V for the PMIC chip, and the chip conducts at that voltage. IC management is possible to find a succession of 1 voltages that have been checked. The power management is mounted by Surface Mount. This power ic can be sub-categorized as Power Management Circuits. It has a total of 5 pins that are attached to IC management. This power management system has 5 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 800mV. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 10V volts. A Surface Mount mounting type is recommended. The supervisors should be set to the following temperature: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. For similar manage ics search of the manufacturer, you can always refer to NCV303, the base PMIC number. The IC power comes from the well-known Automotive, AEC-Q100 series.
NCV303LSN42T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
NCV303LSN42T1G Applications
There are a lot of ON Semiconductor NCV303LSN42T1G Voltage Supervisors applications.
- Solar power charger
- Embedded computing
- Detection of phase loss
- Stable power system
- DSP
- Power communication system
- Important electronics for automotive protection
- Power distribution systems of infant care room
- Dash board
- Digitally controlled LDO regulators circuit
