NCV2001SN2T1G Overview
There is a SOT-23-5 Thin, TSOT-23-5 case in which the instrumentation amplifier is packaged. The instrumentation amplifier in this picture is of the General Purpose-type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 5. There are a total of 5 pins on this op amp. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 2.5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. There are 5 pins on this chip. Regarding input offset voltage, op amp rates 6mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. Using an 820μA supply current, this operational amplifier ics can be operated. There should be no change in the voltage gain at 92.04dB. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. As a whole, there are 1 elements that make up this buffer amplifier. It is used TAPE AND REEL to pack the op amps. Instrumentation amplifiers are numbered by their Automotive, AEC-Q100 series.
NCV2001SN2T1G Features
5 Pins
supply voltage of 2.5V
92.04dB voltage gain
Output Type: Rail-to-Rail
NCV2001SN2T1G Applications
There are a lot of ON Semiconductor NCV2001SN2T1G Instrumentational OP Amps applications.
- High input resistance broadband
- Image computer boards
- High-frequency data acquisition systems
- Multiplication circuits
- Vehicle electronics
- Proportional counter tubes
- Test and measurement instruments
- Signal filtering
- Cinema or auditorium audio system
- single/dual op amp sum and difference circuits
