NCS20062DR2G Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. General Purpose-type instrumentation amplifiers are used in this application. In the case of Cut Tape (CT) cases, linear amplifier will be delivered. An 8-pin op amp ic is included in the package. In terms of the input offset voltage, instrumentation amplifier rates at 500μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . It is possible to operate this buffer amplifier from a supply current of 140μA . 120dB should remain the voltage gain. This op amp ic has 2 circuits. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. Using this buffer op amp requires a temperature of at least -40°C. No temperature greater than 125°C should be used. There is a recommendation that this electrical part be used with a supply with 140μA current rating. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 5.5V. A voltage of 1.8V or higher is recommended for the linear amplifier's supply voltage. There are 2 amplifiers on the op amp.
NCS20062DR2G Features
120dB voltage gain
Output Type: Rail-to-Rail
NCS20062DR2G Applications
There are a lot of ON Semiconductor NCS20062DR2G Instrumentational OP Amps applications.
- Cinema or auditorium audio system
- Image computer boards
- Test and measurement instruments
- Home audio systems
- Video computer boards
- Power generator
- Fission chambers
- Signal amplification
- Semiconductor detectors
- Car stereo
