NCS2001SN1T1 Overview
Op amp is packaged in SOT-23-5 Thin, TSOT-23-5 case. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 5. The pins on this board total to 5 in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 2.5V. I would like to specify that this buffer amplifier belongs to the Operational Amplifiers-type of devices. In total, the buffer amplifier consists of 5 pins. In terms of input offset voltage, operational amplifier rates 6mV. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~105°C . As long as the supply current of the chip does not exceed 820μA, this op amp ic can operate. Voltage gain should remain at 92.04dB. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. As a whole, there are 1 elements that make up this buffer amplifier. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted.
NCS2001SN1T1 Features
5 Pins
supply voltage of 2.5V
92.04dB voltage gain
Output Type: Rail-to-Rail
NCS2001SN1T1 Applications
There are a lot of ON Semiconductor NCS2001SN1T1 Instrumentational OP Amps applications.
- Power generator
- Instrumentation
- E-book readers
- Automation control systems
- Signal operation
- Inverse/same-phase proportional circuit
- Exponential operation circuits
- Cinema or auditorium audio system
- Image computer boards
- Division circuits
