NCP5623MUTBG Overview
It saves board space with the 12-UFLGA Exposed Pad package. As part of the design of this LED driver, there are 3 outputs that have been used.It is mounted using Surface Mount.DC DC Regulator emerges with high efficiency and reliability.It is possible for the led light driver to operate at a temperature of -40°C~85°C TA.Backlight, Camera Flash has considerable advantages.As a result, it operates in accordance with the frequency of 1MHz.12 terminations are designed for its operation.The configuration of the board is built around 12 pins.It is possible for undetermined failures to occur if the voltage supply falls below 2.7V.The number of segments is estimated to be 3.There is a mounting of it by Surface Mount.LED drivers can be found under the base part number NCP5623.It is acceptable for the supply voltage to be 5.5V.There are 12 pins on it.It is also classified into Display Drivers according to its characteristics.With a minimal supply voltage of 2.7V, it reaches the highest efficiency levels.This device is able to provide high efficiency when the maximal supply current should be less than 1mA.The internal voltages needed to power systems is 5V.This device has a voltage output of 5.7V volts.
NCP5623MUTBG Features
Available in the 12-UFLGA Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1MHz
Supply voltage of 3V
Operating with the supply voltage of 5V
Output voltage of 5.7V
NCP5623MUTBG Applications
There are a lot of ON Semiconductor NCP5623MUTBG LED Driver ICs applications.
- Down lights
- Medical surgery lighting
- General lighting
- LED backlight driver for LCD displays for portable equipment
- Down lighting
- LED Lightings for Industrial Equipment
- Industrial LED Lighting: Image Recognition Devices
- LED Lighting PFCs, Linear Dimmable
- A- lamps
- Dimmable LED for vehicle interiors
