NCP4894MNR2 Overview
10-VFDFN Exposed Pad contains an embedded device.Amp parts is recommended that the chip be packaged in the case Tape & Reel (TR) .The 10 termination refers to terminating transmission lines with devices that match their characteristic impedance.Currently, amp parts is configured wAmp partsh 1-Channel (Mono) as the output.The device belongs to the Class AB type of electrical devices.As part of the signal interface in a computer or other communication device, there are 10 pins.The chip is mounted by Surface Mount .Electrical devices like this one have a 2.2V~5.5V supply voltage.The chip is equipped with 1 channels.Amp parts is possible to guarantee Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown when operating.The operating temperature should not exceed -40°C~85°C TA °C.The number of pins is 10 .This chip is included in the NCP4894 family.A maximum output power of 1.8W kWh per hour is possible for this electronic part.A normal operation is dependent upon the supply voltage (Vsup) remaining above 2.2V .There is a Single supply type on this electronic part.
NCP4894MNR2 Features
10-VFDFN Exposed Pad package
10 pin count
NCP4894 family
1.8W kWh per hour
NCP4894MNR2 Applications
There are a lot of ON Semiconductor
NCP4894MNR2 audio amplifiers applications.
- Proportional operation circuits
- Inverse/same-phase proportional circuit
- Addition and subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator and differentiator circuits
- Logarithmic and exponential operation circuits
- Multiplication and division circuits
- Precision measurement
- Power control
- Information processing
