NCP304LSQ46T1 Overview
It is mounted through 4 terminals on the power management. A Tape & Reel (TR) package is used to package the power management. In this IC power you will find 1 functions for you to refer to. This power managment ic consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of SC-82A, SOT-343 functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 240. During operation, the power ic is supplied with a voltage of 1.5V. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The mount is provided by Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 4. There are 4 pins on the power managment ic. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 800mV, which is the minimum supply voltage that should be applied. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 10V volts. Surface Mount mounting is recommended. The supervisors should be set to the following temperature: -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. The supervisor's supply current is specified to 1μA. It is always advisable to use NCP304, the base supervisor number, when searching for similar PMICs from the manufacturer.
NCP304LSQ46T1 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
1μA operating supply current
NCP304LSQ46T1 Applications
There are a lot of ON Semiconductor NCP304LSQ46T1 Voltage Supervisors applications.
- Leakage protection
- Functional modules
- Cloud computing
- Important electronics for automotive safety
- Fire equipment power monitoring system
- Display equipment
- emergency room
- Unattended substation automation
- Computer applications
- Digitally controlled LDO regulators circuit
