NCP304LSQ23T1 Overview
Power management is mounted through 4 terminals. Packaging is in the form of a Tape & Reel (TR). Please refer to this PMIC for 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. In this PMIC, you can find SC-82A, SOT-343 functions for your reference. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 240 is specified for the package. A supply voltage of 1.5V is used to conduct the PMIC chip. A supply voltage of 1 is used to conduct the PMIC chip. The power management is mounted by a Surface Mount-axis. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, IC powers are 4 pins on the board. There are 4 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 800mV. The supply voltage (Vsup) should not exceed 10V volts in this IC power. In this case, Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~85°C TA degrees. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. For this power management, there is an 1μA volt supply current. To find similar IC managements from the manufacturer, you can always search by NCP304.
NCP304LSQ23T1 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
1μA operating supply current
NCP304LSQ23T1 Applications
There are a lot of ON Semiconductor NCP304LSQ23T1 Voltage Supervisors applications.
- Kitchen appliances
- Microcontroller system
- Battery cars
- FPGA design
- Military electronics
- Stable power system
- Automotive power systems
- Multi-voltage system
- Embedded computing
- DVR
