NCP304LSQ18T1G Overview
This power management consists of 4 mounting terminals on which it can be mounted. A Tape & Reel (TR) package is used to package the power management. As a reference, this IC management includes 1 functions for your convenience. A series of 1 channels can be found on this supervisor. For your reference, this PMIC includes a list of SC-82A, SOT-343 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. IC management is possible to find a succession of 1 voltages that have been checked. The mount is provided by Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. In total, the power management has 4 pins in it. This power management system has 4 pins. There should be a minimum voltage supply (Vsup) of 800mV for this PMIC. In this PMIC, the maximum supply voltage (Vsup) should not exceed 10V volts. The recommended mounting type for IC management is Surface Mount. We recommend setting the supervisors to -40°C~85°C TA degrees. Power management has an output of Push-Pull, Totem Pole during operation. There is a supply current of 1μA for the power management. For similar manage ics search of the manufacturer, you can always refer to NCP304, the base PMIC number. A maximum supply temperature of 3μA can be used.
NCP304LSQ18T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
1μA operating supply current
NCP304LSQ18T1G Applications
There are a lot of ON Semiconductor NCP304LSQ18T1G Voltage Supervisors applications.
- Personal computers
- Power communication system
- DVR
- FPGA design
- Automotive permanent magnet synchronous motors
- Leakage current detection
- Insulation fault location system
- Embedded computing
- Sensitive sensors
- Microprocessor system
