NCP303LSN45T1 Overview
This power management consists of 5 mounting terminals on which it can be mounted. In terms of packaging, power management follows the Tape & Reel (TR) model. Please find attached 1 functions for your reference in this IC power. This power managment ic consists of 1 channels, each of which can be used independently. IC management is packaged as a SOT-23-5 Thin, TSOT-23-5 package. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 240 for the package during reflow. When 1.5V is applied to the power ic, it conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Using Surface Mount, IC management is mounted. The power management belongs to the Power Management Circuits subcategory. In total, it has 5 pins on IC management. There are 5 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 800mV. The maximum supply voltage (Vsup) in this PMIC should not exceed 10V volts. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 500nA. To find similar IC managements from the manufacturer, you can always search by NCP303.
NCP303LSN45T1 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current
NCP303LSN45T1 Applications
There are a lot of ON Semiconductor NCP303LSN45T1 Voltage Supervisors applications.
- Linux and server computing
- Embedded computing
- Set top box
- Precision measurement
- emergency room
- Battery-powered equipment
- Dash board
- Rechargeable batteries
- Battery cars
- Solar power charger
