NCP303LSN13T1 Overview
It is mounted through 5 terminals on the power management. It is packaged with Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels on this power managment ic that can be found in a series. IC management is packaged as a SOT-23-5 Thin, TSOT-23-5 package. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. The package peak reflow temperature is specified to be 240. IC management conducts in a 1.5V-voltage supply. During operation, the power ic is supplied with a voltage of 1. Surface Mount mounts power management on the wall. A IC power such as this can be classified as a Power Management Circuits power management system. In total, it has 5 pins on IC management. Pin count of the power management is 5. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 800mV. The maximum supply voltage (Vsup) in this PMIC should not exceed 10V volts. The recommended mounting type for IC management is Surface Mount. This range of temperature should be set for the supervisors: -40°C~125°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. The supervisor's supply current is specified to 500nA. A similar IC managements number of the manufacturer can always be found by using NCP303, the base power ics number.
NCP303LSN13T1 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current
NCP303LSN13T1 Applications
There are a lot of ON Semiconductor NCP303LSN13T1 Voltage Supervisors applications.
- Multi-voltage system
- Low voltage/high power - AI, GPU
- Detection of phase loss
- Leakage current detection
- Sensitive sensors
- Set top box
- WiFi router
- Smart meter
- Urban rail transit weak current power monitoring
- Military communications
