NCP302LSN18T1 Overview
This power management consists of 5 mounting terminals on which it can be mounted. Packaged in the form of a Tape & Reel (TR), power management is easy to use. The purpose of this IC management is to provide you with a reference of 1 functions. It is possible to find on this power management a series of 1 channels. In this PMIC, you can find SOT-23-5 Thin, TSOT-23-5 functions for your reference. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 240 for the package during reflow. In a 1.5V supply voltage, the power management conducts. A supply voltage of 1 is used to conduct the PMIC chip. The power management is mounted by a Surface Mount-axis. A IC power such as this can be classified as a Power Management Circuits power management system. It has a total of 5 pins that are attached to IC management. There are 5 pins on the power managment ic. IC management can only work with a supply voltage of 800mV volts. This IC power should be powered by no more than 10V volts of supply voltage (Vsup). Power management recommends the Surface Mount mounting type. Temperature setting for the supervisors should be -40°C~125°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. The supply current of the power management is 500nA. A similar IC managements number of the manufacturer can always be found by using NCP302, the base power ics number.
NCP302LSN18T1 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current
NCP302LSN18T1 Applications
There are a lot of ON Semiconductor NCP302LSN18T1 Voltage Supervisors applications.
- DSP
- Insulation fault location system
- Transformer load monitoring equipment
- Network equipment
- Precision measurement
- Detection of phase sequence
- Important electronics for automotive protection
- Stable power system
- Electric heating appliances
- Battery cars
