NCP300LSN33T1 Overview
It is mounted through 5 terminals on the power management. There is a Tape & Reel (TR)-packaging method applied to IC management. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels on this power managment ic that can be found in a series. As a reference, this IC power includes SOT-23-5 Thin, TSOT-23-5 functions for your convenience. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 240 for the package during reflow. When a supply voltage of 1.5V is applied to the power ic, it conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Using Surface Mount, IC management is mounted. There is a subcategory of this power ic known as Power Management Circuits. It has a total of 5 pins that are attached to IC management. The pins of the power management system count 5. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 800mV volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 10V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. You should set the supervisor's temperature during -40°C~125°C TA . During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. As far as the supply current of the power management is concerned, it is 500nA. It is always advisable to use NCP300, the base supervisor number, when searching for similar PMICs from the manufacturer.
NCP300LSN33T1 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current
NCP300LSN33T1 Applications
There are a lot of ON Semiconductor NCP300LSN33T1 Voltage Supervisors applications.
- Electric heating appliances
- Smart meter
- Unattended substation automation
- Household appliances
- Rechargeable batteries
- Consumer electronics
- Sensitive sensors
- DC stabilized power supply module
- Detection of phase sequence
- Fire equipment power monitoring system
