NCP300LSN30T1 Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. This power ic is packaged in a way that looks like a Tape & Reel (TR). In this PMIC, you can find 1 functions for your reference. This power management is made up of 1 channels which are available in a series format. IC management is packaged as a SOT-23-5 Thin, TSOT-23-5 package. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 240 for the package during reflow. In a 1.5V supply voltage, the power management conducts. IC management is possible to find a succession of 1 voltages that have been checked. The mount is attached to Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, it has 5 pins on IC management. This power management system has 5 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 800mV, which is the minimum supply voltage that should be applied. In this PMIC, the maximum supply voltage (Vsup) should not exceed 10V volts. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. There is a 500nA supply current present in the power management. The other features include, for example, [0], which is just one example. A similar IC managements number of the manufacturer can always be found by using NCP300, the base power ics number. Voltage supervisor ic can handle 70mA currents.
NCP300LSN30T1 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current
Current rating of 70mA
NCP300LSN30T1 Applications
There are a lot of ON Semiconductor NCP300LSN30T1 Voltage Supervisors applications.
- Insulation fault location system
- Satellite navigation
- Medical-specific isolation transformer
- Precision measurement
- Detection of phase imbalance
- Utility meter
- Data storage applications
- Display equipment
- Smart meter
- Urban rail transit weak current power monitoring
