NCP300HSN47T1G Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. Tape & Reel (TR)-packaging is used. To assist you, this IC power includes 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please find attached SOT-23-5 Thin, TSOT-23-5 functions for your reference in this IC power. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. When a supply voltage of 1.5V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. This power ic can be sub-categorized as Power Management Circuits. In total, the power management has 5 pins in it. The pins of the power management system count 5. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 800mV. This IC power should be powered by no more than 10V volts of supply voltage (Vsup). The recommended mounting type for IC management is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. The supply current of the power management is 500nA. For similar manage ics search of the manufacturer, you can always refer to NCP300, the base PMIC number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 1.4μA.
NCP300HSN47T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current
NCP300HSN47T1G Applications
There are a lot of ON Semiconductor NCP300HSN47T1G Voltage Supervisors applications.
- Stable power system
- DSP
- Power distribution systems of operating room
- Smart meter
- Detection of phase imbalance
- Sensitive sensors
- Battery cars
- Precision measurement
- Personal computers
- DC stabilized power supply module
