NCP1800DM41R2G Overview
There is a package Tape & Reel (TR) available.There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package included with this item that you will need to take care of.A mounting type of Surface Mount has been specified for this device.The best way to adjust the temperature is to set it to -20°C~85°C TA.To operate the device, an analog IC called BATTERY CHARGE CONTROLLER is used.Charge the device by supplying it with Constant - Programmable current.This device's related parts can be found under the base part number NCP1800.8 terminations are present.Due to the 8 pins on it, it is a very simple circuit.It is possible to program features such as Current.It is listed on the device that it can charge at a maximum current of 1A.It is necessary to connect the 8 pins during the installation process of this product.Withstanding a voltage of 16V, it is a reliable piece of equipment.Ideally, when the output voltage of the device is set to 4.1V, you will be able to achieve the highest degree of efficiency.When the operation is completed, the output current is 20mA.Devices belonging to subcategory Power Management Circuits include this device.It is capable of functioning at a voltage as low as possible, for example 2.5V voltage for this circuit is used.I'd like to emphasize that the mounting of the device is done in the same manner as Surface Mount.In most cases, the maximum supply voltage (Vsup) is set to 0.25mA.It can be seen that the device has an input voltage of 6V.This device can accept up to 16V volts of input voltage.It is important to note that the maximum output supply voltage for this operation must be set to 4.41V.
NCP1800DM41R2G Features
Power Management Circuits subcategory
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
NCP1800DM41R2G Applications
There are a lot of ON Semiconductor
NCP1800DM41R2G Battery Chargers ICs applications.
- Maintenance shops
- Rental fleets
- Truck dealers
- Floor scrubber
- Material handling
- Man lift
- Boat
- Cellphones
- Laptops
- Tablets
