NCP112DR2 Overview
Power management is mounted through 14 terminals. Packaging is in the form of a Tape & Reel (TR). Please refer to this PMIC for 1 functions. There are 3 channels on this power managment ic that can be found in a series. In this PMIC, you can find 14-SOIC (0.154, 3.90mm Width) functions for your reference. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. IC management is specified that the package peak reflow temperature should be 240. When a supply voltage of 5V is applied to the power ic, it conducts. During operation, the power ic is supplied with a voltage of 4. Surface Mount is the one that mounts power management. Power Management Circuits is a subcategory of this PMIC chip. In total, the power management has 14 pins in it. There are 14 pins on the power managment ic. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 4.5V. During this IC power, the maximum supply voltage (Vsup) should not exceed 16V volts. The recommended mounting type is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. For this power management, there is an 3mA volt supply current. For similar manage ics search of the manufacturer, you can always refer to NCP112, the base PMIC number. It requires 5V watts of power to operate this voltage supervisor.
NCP112DR2 Features
Multi-Voltage Supervisor type
Minimum supply voltage of 4.5V
3mA operating supply current
NCP112DR2 Applications
There are a lot of ON Semiconductor NCP112DR2 Voltage Supervisors applications.
- Power distribution systems of ICU
- Detection of phase loss
- Power distribution systems of infant care room
- Multi-voltage system
- Network equipment
- WiFi router
- Smart meter
- Important electronics for automotive safety
- Smartphones
- Solar power charger
