NCP1092DRG Overview
As part of the Tape & Reel (TR) package, PoE controller is embedded.Packaged in the manner of 8-SOIC (0.154, 3.90mm Width).As far as this application is concerned, it is a Controller (PD) type PoE controller that is being used.Channel number is growing strong/weak: 1.As a precaution, the operating temperature of this Po E controller is kept at -40°C~85°C in order to maintain its reliability.In order to operate this electrical Po E controller, it requires a voltage of 0V~57V as a supply voltage.It is possible to identify its Po E controllers based on its base part number NCP1092.In a 8 termination, a transmission line is terminated with an impedance-matched power over ethernet controller.It is capable of producing 12.95W Watts of power at its maximum.There are 8 pins on it.It is designed with 8 pins.A transistor has a peak reflow temperature (Cel) of NOT SPECIFIED.500mA features maximum design flexibility due to its output current.In this case, 9.8V is the output voltage of the power over ethernet controller.This power over ethernet PoE controller can be powered up to 57V volts.There is a minimum input voltage of 0V which is required by this power over the ethernet controller.
NCP1092DRG Features
Tape & Reel (TR) package
8 pin count
8 pins
The output current of 500mA
NCP1092DRG Applications
There are a lot of ON Semiconductor NCP1092DRG Power Over Ethernet (PoE) Controllers applications.
- Industrial Automation Equipment
- Wireless LAN Access Point/WiMAX? Base Station
- Pass-through System
- PoE powered device appliances
- Single-Port PSE End-Point Applications
- IEEE 802.3bt (Draft) Compliant Devices
- Commercial Information Displays
- Security Cameras
- High power (>12.95 W) powered devices
- Dual Signature PD/Forced UPOE
