NCP1090DRG Overview
As part of Tape & Reel (TR), PoE controller is embedded.It is the way it is packaged that makes it 8-SOIC (0.154, 3.90mm Width).PoE controllers of this type are called Controller (PD).Currently, there are a number of channels that are strong or weak: 1.Ensure the reliability of the PoE by operating it at -40°C~85°C.The supply voltage of this electrical Po E controller is 0V~57V.It is possible to find the Po E controllers of the base part number by using the base part number NCP1090.In a 8 termination, a transmission line is terminated with an impedance-matched power over ethernet controller.Power can be reached by this electrical ethernet over power controller at a maximum of 12.95W Watts.There is a pin count of 8 on this ethernet over power controller.The 8 pins are designed into it.During reflowing of the electrical ethernet power controller, the peak temperature (Cel) reaches NOT SPECIFIED °C.A key feature of 500mA is its output current, which provides maximum design flexibility.An power over ethernet controller such as this one produces a voltage of 9.8V as its output voltage.The maximal input voltage of this power over ethernet PoE controller is 57V.There is a minimum input voltage of 0V for this power over the ethernet controller.
NCP1090DRG Features
Tape & Reel (TR) package
8 pin count
8 pins
The output current of 500mA
NCP1090DRG Applications
There are a lot of ON Semiconductor NCP1090DRG Power Over Ethernet (PoE) Controllers applications.
- Dual Signature PD/Forced UPOE
- VoIP Phones
- Higher Power Ethernet Powered Devices
- Internet Appliances
- Multiband access points
- High power (>12.95 W) powered devices
- Wireless Access Points
- Routers
- Non-Compliant, Application Specific Devices
- IEEE 802.3bt (Draft) Compliant Devices
