NBSG16BAR2 Overview
It can be seen that the ICs has been enclosed within the package 16-LBGA, FCBGA.There is a package named Tape & Reel (TR) which includes this module.Integrated circuit is mounted using the way of Surface Mount.Integrated circuit belongs to the class Transceiver.You can find similar integrated circuit systems by searching for the NBSG16 family.In this case, it would be appropriate to apply the ICs in Instrumentation.On the ICs solutions, there are 16 terminations.A ICs applications with 16 pins is available.It is recommended to run this logic gate IC at 2.5V.In order to make this ICs application work properly, it should be mounted at Surface Mount.The ICs complete is recommended for use when the temperature is below 85°C.A integrated circuit system should not operate at temperatures below -40°C.There are a total of 16 pins on integrated circuit chip.In this integrated circuit, the supply voltage can be set to 3.465V.For this integrated circuit, the supply voltage should not be less than 2.375V.Line Driver or Receivers is its subcategory.There is a possibility of delivering voltage at +-2.5/+-3.3V.This integrated circuit board also contains the following features:NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.465V.
NBSG16BAR2 Features
Applications : Instrumentation
Supply power of +-2.5/+-3.3V
NBSG16BAR2 Applications
There are a lot of ON Semiconductor NBSG16BAR2 Specialized ICs applications.
- All converters requiring very low standby power
- Isolated CAN Bus Interface
- Membrane Keypads
- All AC-DC converters with X capacitors of 100 nF up to 6 mF
- Ecosystem Control
- Authentication of Medical Sensors and Tools
- Secure Management of Limited Use Consumables
- μP Switch Interfacing
- Peripheral Authentication
- Lossless generation of zero crossing signal
