NB6L11DTR2 Overview
It is available in the case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) for this cut smart buffer. In case Tape & Reel (TR), the cut smart buffer is available. Normal operation has a maximum value of 6GHz. There are 8 terminations in it. Supply voltages of 2.5V enable high efficiency. The mount is made up of Surface Mount. This electronic part is classified as Fanout Buffer (Distribution), Translator. It is recommended to set the temperature to -40°C~85°C so the system can perform reliably. It should be capable of operating with a power supply of 2.375V~3.465V volts. This item is positioned in the way of Surface Mount. There are 8 pins on timeing clock. There is a value of ECL as the output. It is a member of the NB6L11 family. This clock divider?is econtained in Clock Drivers. There is an electronic gadget called 6L in this family. In order for the supply voltage (Vsup) to stay above 2.375V, it should be kept as high as possible. Default settings are set to output 4. There is a +-2.5/+-3.3V volt supply attached to it.
NB6L11DTR2 Features
8 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory
NB6L11DTR2 Applications
There are a lot of ON Semiconductor NB6L11DTR2 Clock Buffers & Drivers applications.
- Handheld test instruments
- Oscilloscope and logic analyzer front ends
- Wired communication field
- Medical imaging
- High-end consumer electronics
- Peak detection
- Smartphone
- Cloud computing
- Clock signal format conversion
- High speed line receiver
