NB3L553DR2G Overview
The clock divider is available in 8-SOIC (0.154, 3.90mm Width) case. A Cut Tape (CT) is used to package it. It has 8 terminations in it, which means that it is terminated. Supply voltages of 2.5V are capable of achieving high efficiency. As you can see, it is mounted by Surface Mount. This electronic part is classified as Fanout Buffer (Distribution). Setting the temperature to -40°C~85°C will ensure reliable performance. 2.375V~5.25V V power should work with it. It's in the way of Surface Mount. On this board, there is a pin count of 8. The output is set to LVCMOS, LVTTL. During operation, 8 pins are used. Basically, it belongs to the same family as the NB3L553. There is an embedded device in Clock Drivers containing this circuit clock. The gadget belongs to the 3L family. There is a 2.625V maximum supply voltage set (Vsup). As a rule, the supply voltage (Vsup) should be kept above 2.375V for normal operation. There is a default setting of output 4. It is powered by a 2.5/5V volt supply. As a result of utilizing this gadget, ALSO OPERATES AT 3.3V OR 5V SUPPLY is also available. The frequency of 200MHz maintains excellent accuracy.
NB3L553DR2G Features
8 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory
at 200MHz frequency
NB3L553DR2G Applications
There are a lot of ON Semiconductor NB3L553DR2G Clock Buffers & Drivers applications.
- 5G
- Line receiver and signal recovery
- Oscilloscope and logic analyzer front ends
- Navigation equipment
- High-performance server
- Hardware accelerator
- Ultra Mobile PC (UMPC)
- Patient diagnosis
- Aviation
- Backplane
