NB2309AI1D Overview
As a clock IC, it uses the Tube package. A Clock PLL is included with the 16-SOIC (0.154, 3.90mm Width) package. This clock generator will sustain a maximum temperature of 240 when reflown. It contains a total of 16 terminations within RF synthesizer. The clock generator ic should be grounded with a voltage of 3.3V. There is a Clock PLL called Clock which is designed to be the input to this clock generator. For full access to the electronic component's capabilities, 1 circuits are implemented. Providing a maximum frequency of 133.33MHz, this clock-based RF synthesizer is suitable for a variety of applications. This component can be conveniently installed on the panel thanks to the Surface Mount. Clock PLL is capable of receiving a maximum of 3.6V as a supply voltage. This frequency synthesizer requires a supply voltage above 3V to be safe. There are 3V~3.6V available for use with this clock PLL. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. As far as electrical parts go, this component can be classified as a Zero Delay Buffer component. In this IC, a 16-bit frequency generator is designed specifically for use in microprocessors. This part number is related to its related electronic parts. It is possible to connect to the PLL via 16 pins. Electronic frequency generator can handle voltages up to 3.3V. Low timing skew is provided by this analog clock generator at maximum 0.25 ns. There are 8 pins configured for enabling high true outputs on this clock generator.
NB2309AI1D Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
8 true outputs
NB2309AI1D Applications
There are a lot of ON Semiconductor NB2309AI1D Clock Generators applications.
- Small signal recovery
- GPS systems
- Radio receivers
- Automatic test equipment
- Wireless infrastructure
- Signal analyzer
- Frequency synthesis
- Frequency Modulation (FM) stereo decoders
- Ports
- Aerospace and defense
